RM0.00
Bose FreeSpace DS 40SE 4.5" 40W Passive Speaker (BOSE DS40SE)
Price | RM0.00 |
Product SKU | DS40SE |
Brand | BOSE |
Availability | In Stock |
Quantity |
|
Description
Highlight
- Full-range loudspeaker with a single 4.5" (114 mm) full-range driver in a ported enclosure designed for surface mounting in foreground and background music and paging applications
- Simple 1->2->3 installation system. Mounting hardware allows for horizontal and vertical orientation with adjustable pitch or yaw
- Integrated multi-tap transformer with innovative thumb wheel adjustment for easy-to-change tap settings from under front end cap
- Shared voicing across entire FreeSpace DS product family enables DS 16, DS 40, and DS 100 loudspeakers to be integrated on the same system and maintain consistent tonal quality
- Supported by a suite of accessories, including wall-mount bracket, ceiling-mount bracket, pole-mount bracket and junction boxes
BOSE DS40SE
Premier high-performance, extended-range, flush-mount loudspeaker designed for foreground music and speech reproduction in a wide range of installed applications. High output and wide, 160° conical pattern with a frequency range down to 60 Hz.
SPECIFICATION
Frequency Response (+/-3 dB) 1 | 80 Hz - 17 kHz |
Frequency Range (-10 dB) 1 | 70 Hz - 19 kHz |
Nominal Dispersion | 125° H x 125° V |
Recommended High-Pass Filter | 70 Hz high-pass filter |
Loudspeaker EQ | Recommended |
Overload Protection | PTC/Resistor |
Long-Term Power Handling 2 | 40 W (160 W peak) |
Sensitivity (SPL / 1 W @ 1 m) 3 | 87 dB SPL |
Maximum SPL @ 1 m 4 | 103 dB SPL (109 dB SPL peak) |
Nominal Impedance | 8 Ω (transformer bypassed) |
Transformer Taps (70/100 V) | 70 V: 2.5 W, 5 W, 10 W, 20 W, 40 W 100 V: 5 W, 10 W, 20 W, 40 W |
Transducers | |
Driver Compliment | 4.5" (114 mm) full-range driver |
Physical | |
Enclosure | PC/ABS, textured |
Grille | Powder-coated steel grille |
Environmental | Outdoor per IEC 529 IP55 |
Connectors | Three-terminal barrier strip integrated on included mounting bracket. Optional accessories available for use when ceramic connector and thermal fuse are required. Wire gauge: 18 AWG (0.8 mm) to 14 AWG (2.0 mm) |
Suspension / Mounting | Included bracket allows for horizontal or vertical mounting positions, each with either pitch or yaw adjustment. Insert on rear of enclosure sized for M4 x 14 mm screw for use with safety chain |
Dimensions (Enclosure only) | 6.3" H x 12.8" W x 6.9" D (159 mm x 326 mm x 175 mm) Depth with wall mount bracket: 9.4" (238 mm) |
Reviews (0)
view all
back